2017 Ford F-150 Brake Pad Replacement
Complete guide to 2017 Ford F-150 brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Brake Pad Replacement is one of the most common repairs for 2017 Ford F-150. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement brakes part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Open the glove compartment.
Remove everything from inside the glove compartment.
Step 2:
Push in on the latches on the sides of the glove compartment to release it from the dashboard.
Set it down on the floor of the passenger side footwell.
Step 3:
Push forward on the two latches of the honeycomb filter cover.
Remove the cover.
Slide the old filter from the compartment.
Step 4:
Insert the new filter into the compartment with the arrows pointed in the direction indicated.
Depending on the brand, your filter may look different.
Step 5:
Insert the bottom two latches of the cover into the latch holes.
Swing the cover towards the filter and press down on the two side latches until they clip into place.
Step 6:
Lift the glove compartment up until it is level with the latch holes.
Push the latches on the left and right inward until the latches are secured.
Replace all the contents of the glove compartment.
Close the glove compartment.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $90-$180)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($150-$300)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2017 Ford F-150 instead of replacing it, you're preventing approximately 6195 kg of CO₂ emissions. Manufacturing a new 2017 Ford F-150 generates 6200 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2017 Ford F-150 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.