2016 Toyota Tacoma Brake Pad Replacement
Complete guide to 2016 Toyota Tacoma brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Brake Pad Replacement is one of the most common repairs for 2016 Toyota Tacoma. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement brakes part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Turn the vehicle completely off and remove the key.
This prevents electrical shocks and keeps the fuse box area safe for physical contact.
Step 2:
Open the hood and identify the fuse box.
A lot of vehicles store the fuse box in the engine bay under plastic, if not, look under the steering wheel.
Step 3:
Refer to the fuse box diagram to locate the correct fuse.
Each fuse controls a specific electrical component in the car, so if the wrong fuse is chosen, nothing will change.
Fuse pullers are often found at the circled location.
Step 4:
Use the fuse puller to remove the fuse by pulling it straight up.
By pulling straight up, you can avoid bending or damaging metal parts within the fuse box.
Step 5:
Hold the fuse up to a light and check whether the metal strip inside is broken.
If the strip is broken, the fuse has blown and will not allow current to flow.
Step 6:
Make sure that the replacement fuse is the same amperage.
Push the new fuse into the corresponding spot.
Step 7:
Close up the fuse box and hood. Then turn on your truck!
If the component still does not work, you may have replaced the wrong fuse.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $90-$180)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($150-$300)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2016 Toyota Tacoma instead of replacing it, you're preventing approximately 5995 kg of CO₂ emissions. Manufacturing a new 2016 Toyota Tacoma generates 6000 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2016 Toyota Tacoma and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.