2016 Nissan Altima Brake Pad Replacement

Brake Pad Replacement is one of the most common repairs for 2016 Nissan Altima. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

• Replacement brakes part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Slide the little switch up on the back of the key. While doing so, remove the physical key that is stored inside the fob by pulling away.

Step 2:

Insert a flathead screwdriver or prying tool into the small notch located at the bottom of the key fob.

Carefully rotate the flathead counterclockwise to pry apart the two halves of the fob.

Step 3:

Pry out the battery with a flathead to avoid skin contact with electrical components.

Make sure to avoid touching the motherboard.

Step 4:

Now carefully place the new battery onto the silver platter.

Keep in mind positive side of the battery will be facing downward, while negative side will be facing towards you.

Step 5:

Line up the parts in order to secure the key.

Press down until the case makes a "click" sound.

Step 6:

Finally, insert the physical key back into the fob to complete your replacement.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2016 Nissan Altima instead of replacing it, you're preventing approximately 5895 kg of CO₂ emissions. Manufacturing a new 2016 Nissan Altima generates 5900 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!