2016 Mazda MX-5 Miata Brake Pad Replacement
Complete guide to 2016 Mazda MX-5 Miata brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Brake Pad Replacement is one of the most common repairs for 2016 Mazda MX-5 Miata. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement brakes part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
The battery is in the right side of the rear cargo compartment. It can be found by moving the carpet and wood cover.
With a 10mm wrench, remove the positive battery terminal.
Do not let any metal in contact with the positive battery terminal contact any other metal item. This might make sparks.
Step 2:
Remove the three trim panel retainer clips.
Old clips might break easily. Be extra careful when removing them or get spares.
Step 3:
Remove the three screws that hold the door panel in place.
These screws are all different, so keep note of where they all go. The short screw goes in the door latch; the long screws go in the door handle.
Step 4:
Remove the cover around the door latch by pulling the handle and rotating the cover.
Step 5:
Remove the door panel by pulling the bottom out and lifting up.
Step 6:
Remove the four screws holding the plastic speaker mount.
As you remove the screws, don't let the speaker fall out and pull the wire.
Step 7:
Detach the connector that powers the speaker by pressing down on the top latch and gently pulling.
A small screwdriver might help with the latch but be careful. Old plastic can be brittle.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $90-$180)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($150-$300)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2016 Mazda MX-5 Miata instead of replacing it, you're preventing approximately 5595 kg of CO₂ emissions. Manufacturing a new 2016 Mazda MX-5 Miata generates 5600 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2016 Mazda MX-5 Miata and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.