2016 Ford Fiesta Windshield Wiper Replacement
Complete guide to 2016 Ford Fiesta windshield wiper replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Windshield Wiper Replacement is one of the most common repairs for 2016 Ford Fiesta. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 10-15 min and requires easy skill level.
What You'll Need
- Replacement maintenance part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Unlatch the hood from the inside of your car.
If you're doing this right after driving your car, turn off the engine and let it cool down before working on it.
Put your fingers under the hood and lift the lever. With your other hand, raise the hood up.
The hood should rest on the support rod on its own; you can now remove the hand that was initially supporting the hood.
Step 2:
Remove all pins from the cover by firmly bending them out of the hood
You can use a mask to prevent inhaling dirt from the cover
Step 3:
Detach the pressure hose from the washer nozzle.
After detaching, examine the pressure hose for any debris that may have accumulated from the old washer nozzle.
Step 4:
Use pliers to compress the tabs that hold the nozzles in place.
The tabs will be located at the top and bottom of the nozzle from the hood.
Once compressed, firmly grip the nozzle at the top and pull it away
Step 5:
Carefully insert the new washer nozzle into the top of the hood, applying gentle pressure until it snaps securely into place.
Step 6:
After inserting the washer nozzle, double-check from inside the hood to ensure that the tabs are firmly gripping the hood
Re-attach the hose to the nozzle.
Step 7:
To re-attach the cover push the pins on the cover into the coresponding holes
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $9-$24)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($15-$40)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2016 Ford Fiesta instead of replacing it, you're preventing approximately 6199 kg of CO₂ emissions. Manufacturing a new 2016 Ford Fiesta generates 6200 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2016 Ford Fiesta and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.