2016 Audi A4 Oil Change
Complete guide to 2016 Audi A4 oil change. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Oil Change is one of the most common repairs for 2016 Audi A4. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 30-45 min and requires easy skill level.
What You'll Need
- Replacement maintenance part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Go inside your car and press the “CAR” button on the control panel.
Scroll down using the control wheel to "Windshield wipers".
Press the center button on the control wheel to select the option.
Step 2:
Press the center button on the control wheel to edit the service position.
In the drop-down menu, switch it from "off" to "on" by scrolling with the control wheel and pressing the center button.
The windshield wipers will now be in the up position.
Step 3:
You should be able to lift the windshield wipers towards the windshield at 90 degrees.
Lift the windshield blades to about 120 degrees.
Step 4:
In the packaging for the Michelin windshield wipers, the wipers are pre-installed with a top-lock connector.
Raise the pre-installed top-lock connector.
Step 5:
Pinch the bottom of the connector to release the cover and remove the top-lock connector.
The Audi A4 uses a “Top Lock-Narrow” connector.
Step 6:
Install the new "Top Lock-Narrow" connector onto the base connector.
Press down until it clicks into place.
Step 7:
Install the blade into the blade arm, sliding the new wiper blades down until it clicks and is locked into place.
Make sure to install the 24 inches wiper blade on the driver side, and the 20 inches wiper blade on the passenger side.
Step 8:
Install the new connector cover by pinching the base of the connector.
Close the connector cover on both sides of the wiper blades.
Step 9:
Remove the yellow wiper protector on both blades.
Put the wiper back on the windshield
Step 10:
Set the windshield wiper service position back to "off".
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $21-$45)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($35-$75)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2016 Audi A4 instead of replacing it, you're preventing approximately 6398 kg of CO₂ emissions. Manufacturing a new 2016 Audi A4 generates 6400 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2016 Audi A4 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.