Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Maintenance
easy

2015 Ford Explorer Windshield Wiper Replacement

Complete guide to 2015 Ford Explorer windshield wiper replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$15 - $40
⏱️ Time:10-15 min
🌍 CO₂ Saved:6199 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$9 - $24
Labor$6 - $16
Total Estimated Cost$15 - $40

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Windshield Wiper Replacement is one of the most common repairs for 2015 Ford Explorer. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 10-15 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement maintenance part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Lift and open the rear cargo door.

Step 2:

Step 2 - Image 1

Locate the two plastic screw covers that are adjacent to the rear light covers.

Step 3:

Step 3 - Image 1

Using a flathead screwdriver, pry out both plastic screw covers.

Step 4:

Step 4 - Image 1

Once covers are removed, there will be an 8 mm hex head screw located beneath each cover.

Step 5:

Step 5 - Image 1

Using an 8 mm Deep Socket Wrench, remove both of the 20 mm (length) hex-head screws.

Step 6:

Step 6 - Image 1
Step 6 - Image 2

Gently pull the tail light cover from the car.

You may have to gently play with the cover by moving it back and forth in order to pry it loose form the car.

Step 7:

Step 7 - Image 1

Once removed, the bulb sockets will be located on the inside portion of the tail light cover.

Step 8:

Step 8 - Image 1

Turn the bulb socket about one quarter turn in a counterclockwise direction.

After it is turned, gently pull and remove the bulb socket from the tail light cover.

Step 9:

Step 9 - Image 1

Gently remove the bulb from the bulb socket.

Step 10:

Step 10 - Image 1

Gently place the new bulb in the bulb socket.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $9-$24)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($15-$40)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2015 Ford Explorer instead of replacing it, you're preventing approximately 6199 kg of CO₂ emissions. Manufacturing a new 2015 Ford Explorer generates 6200 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2015 Ford Explorer and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides