2014 Toyota Highlander Headlight Bulb Replacement

Headlight Bulb Replacement is one of the most common repairs for 2014 Toyota Highlander. This repair involves replacing the damaged lighting component with a new or refurbished part. The process typically takes 15-30 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

• Replacement lighting part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Remove the key by pressing the button on the side.

Make sure the red alarm button is face-up so that the button you need to press is on the left side of the plastic layer.

Step 2:

Insert [product|IF145-020|tweezers] into the notch where the key was.

You can use any kind of tweezer you have at home as long as it fits into the notch.

Step 3:

Apply a small amount of pressure to the tweezer, so you can use them to pop the plastic layer open.

Step 4:

Check the front and back of the green circuit to locate the battery.

Step 5:

Using the pair of tweezers, remove the battery from the device.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2014 Toyota Highlander instead of replacing it, you're preventing approximately 5999 kg of CO₂ emissions. Manufacturing a new 2014 Toyota Highlander generates 6000 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!