2014 BMW X3 Windshield Wiper Replacement

Windshield Wiper Replacement is one of the most common repairs for 2014 BMW X3. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 10-15 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

• Replacement maintenance part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Open the trunk to get behind the taillight. Pop open the plastic cover from behind the light.

Step 2:

Unclip the wire for the entire component.

Step 3:

Using socket-wrench, unscrew and remove the only visible bolt.

Step 4:

Remove and place component in safe place.

Step 5:

Unplug the only wire running into the circuit board chip.

Step 6:

Swap out the malfunctioned board and pop back in the new circuit board chip.

Step 7:

Plug wire back into the board.

Step 8:

Line the taillights tabs back up and follow steps 1-3 in reverse order.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2014 BMW X3 instead of replacing it, you're preventing approximately 6499 kg of CO₂ emissions. Manufacturing a new 2014 BMW X3 generates 6500 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!