2013 Nissan Altima Tire Rotation
Complete guide to 2013 Nissan Altima tire rotation. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Tire Rotation is one of the most common repairs for 2013 Nissan Altima. This repair involves replacing the damaged tires component with a new or refurbished part. The process typically takes 30-45 min and requires easy skill level.
What You'll Need
- Replacement tires part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Use an opening tool or spudger to gently pry open the cover behind the door handle.
Use a 10 mm socket to remove the bolt under the handle cap.
Step 2:
Use an opening tool or spudger to pry the window and door lock assembly up and free from the frame.
Use a 10 mm socket to remove the single bolt underneath the control assembly.
Step 3:
There is another screw located underneath the long arm panel (to the left of the door handle), unscrew it.
Step 4:
Unhook the cables from the window control panel to take off the door.
Step 5:
Unscrew the three silver screws directly behind the door handle (Top, left, right).
Step 6:
Unhook the two wires that hook into the unlock/lock mechanisms.
Step 7:
Remove the old door handle.
Step 8:
Place and screw the new handle into place.
Step 9:
Hook the lock/unlock wires back into the door handle. (Handle will not work unless this step is complete.
Step 10:
Plug in the window control panel and place the panel back in its respectful place.
The door panel clips should goes into the holes and snap in when in place.
Step 11:
Insert the screw beneath the control panel and the screw to the right of the lock/unlock button.
Step 12:
Next, place both the door arm and window control panel in their place. The arm should snap in while the control panel sits flush in place.
Step 13:
Lastly, place the screw back in its respective place and tighten it with the rachet.
Step 14:
Finishing result: The older interior handle is in my hand, while the new interior handle is in place.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $21-$45)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($35-$75)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2013 Nissan Altima instead of replacing it, you're preventing approximately 5899 kg of CO₂ emissions. Manufacturing a new 2013 Nissan Altima generates 5900 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2013 Nissan Altima and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.