2013 Hyundai Elantra Headlight Bulb Replacement

Headlight Bulb Replacement is one of the most common repairs for 2013 Hyundai Elantra. This repair involves replacing the damaged lighting component with a new or refurbished part. The process typically takes 15-30 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

• Replacement lighting part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Locate the seam on the key fob where the two halves meet.

Step 2:

Be careful while using the plastic opening tool as it can slip and hit you as you try to pry open the key fob.

Insert your plastic opening tool in the seam gap and twist until it separates.

It might take some force to open the key so try and hold it closer to the tip for more control and power.

To open the key fob gently pull each half apart.

Step 3:

Use a plastic opening tool to gently push the battery out of the battery holder.

Step 4:

Slide the new CR2032 battery in with the + (plus/positive) side facing upwards.

Step 5:

Put the two halves together.

Push evenly across the key fob to connect the two halves.

Once you hear a click, the key has been reassembled.

Step 6:

Test the key fob to see if it works.

The yellow light indicator on the car shows that the key fob works.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2013 Hyundai Elantra instead of replacing it, you're preventing approximately 5699 kg of CO₂ emissions. Manufacturing a new 2013 Hyundai Elantra generates 5700 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!