2013 Honda Odyssey Battery Replacement (Car)

Battery Replacement (Car) is one of the most common repairs for 2013 Honda Odyssey. This repair involves replacing the damaged electrical component with a new or refurbished part. The process typically takes 30 min and requires easy skill level.

What You'll Need

• Replacement electrical part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1: Remove Mechanical Key

Remove the mechanical key by moving the tab on back of key & pulling out the key.

Step 2: Separate Shell

Separate the shell using a large screw driver or by using the mechanical key. The shells have a separating tab in the middle. Pry open the shell by gently twisting the screwdriver or the mechanical key into the separating tab.

Step 3: Remove Battery

Remove the battery carefully using a small screw driver.

Step 4: Replace Battery

Replace the battery. Make sure not to damage the 2 tabs holding the battery. Do not press or force the battery into its place, slide it underneath the tabs.

Battery : Lithium Coin Battery CR2032 3V

Step 5: Re-assemble Shell

Put the outer shell together and gently press and snap the two half's in place

Step 6: Mechanical key

Put the mechanical key back

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2013 Honda Odyssey instead of replacing it, you're preventing approximately 5785 kg of CO₂ emissions. Manufacturing a new 2013 Honda Odyssey generates 5800 kg of CO₂, while this repair only produces about 15 kg of CO₂. That's a 100% reduction in carbon emissions!