2013 Ford Fusion Headlight Bulb Replacement

Headlight Bulb Replacement is one of the most common repairs for 2013 Ford Fusion. This repair involves replacing the damaged lighting component with a new or refurbished part. The process typically takes 15-30 min and requires easy skill level.

🔧 Required Tools

What You'll Need

• Replacement lighting part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Locate the hood latch and pull it to open

Step 2:

The front hood will open and be caught by a saftey latch. Run fingers under the hood and push the latch to the left to open the hood completely

Step 3:

Hold up the hood with the hood support rod

Step 4:

Remove negative terminal from the battery using a 10mm socket. Remove the bolt that is holding the negative terminal and pull terminal off the battery.

Step 5:

Locate the headlight bulb in the front of the car under the hood and twist off the cap covering the headlight bulb

Step 6:

twist the housing to the light bulb and pull it out

Step 7:

unclip the light bulb from the housing latch and replace light bulb

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2013 Ford Fusion instead of replacing it, you're preventing approximately 6199 kg of CO₂ emissions. Manufacturing a new 2013 Ford Fusion generates 6200 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!