Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Lighting
easy

2013 Chevrolet Camaro Headlight Bulb Replacement

Complete guide to 2013 Chevrolet Camaro headlight bulb replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$20 - $100
⏱️ Time:15-30 min
🌍 CO₂ Saved:6099 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$12 - $60
Labor$8 - $40
Total Estimated Cost$20 - $100

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Headlight Bulb Replacement is one of the most common repairs for 2013 Chevrolet Camaro. This repair involves replacing the damaged lighting component with a new or refurbished part. The process typically takes 15-30 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement lighting part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Open the trunk by either the button on the driver side door panel or the key fob.

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Use your key fob or press on your brakes to identify which bulb needs to be replaced.

Identify which bulbs need to be replaced.

In this case my driver side outside bulb was blown so that is the one that is getting replaced today.

Step 3:

Step 3 - Image 1
Step 3 - Image 2

Unscrew the rubber screw by turning counter clockwise.

Gently pull these caps straight up to remove them.

The rubber screw can be removed by hand but it would be easier to use the pliers.

Step 4:

Step 4 - Image 1
Step 4 - Image 2

Rotate the entire socket a half turn clockwise. After this is done, gently pull the bulb socket from the taillight housing.

Remove and dispose of the blown bulb.

Step 5:

Step 5 - Image 1
Step 5 - Image 2

At this point you can place the new bulb into the plug.

When placing the new bulb into the plug be careful to not apply too much pressure. If the plug does not initially snap into place trying turning it and gently push it into place.

Step 6:

Step 6 - Image 1
Step 6 - Image 2

Before placing the plug back into the housing you should test the bulb to make sure it is in working order.

You can test the bulb by locking the door with your key fob or have someone press the brakes.

Repeat steps until all lights are in working order.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $12-$60)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($20-$100)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2013 Chevrolet Camaro instead of replacing it, you're preventing approximately 6099 kg of CO₂ emissions. Manufacturing a new 2013 Chevrolet Camaro generates 6100 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2013 Chevrolet Camaro and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides