2012 Toyota RAV4 Windshield Wiper Replacement

Windshield Wiper Replacement is one of the most common repairs for 2012 Toyota RAV4. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 10-15 min and requires easy skill level.

What You'll Need

• Replacement maintenance part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Lift the cover where the wiper arm is attached to the rear window.

Take your time to remove the cover, Due to adverse weather the plastic could become frail.

Step 2:

Gently lift the wiper arm away from the rear window.

Step 3:

Rotate the wiper upwards which will then release the wipers from the arm.

Step 4:

Position the new blade on the small bar attachment into the hook of the wiper arm and click it into place.

Be sure to align the groove of the blade with the wiper arm.

Step 5:

Gently place the wiper back against the rear windows.

Step 6:

Using your thumb gently push the cover back into the base of the wiper arm.

Step 7:

After completion of this guide feel free to test out your newly installed rear windshield wiper.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2012 Toyota RAV4 instead of replacing it, you're preventing approximately 5999 kg of CO₂ emissions. Manufacturing a new 2012 Toyota RAV4 generates 6000 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!