2012 Nissan Versa Tire Rotation
Complete guide to 2012 Nissan Versa tire rotation. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Tire Rotation is one of the most common repairs for 2012 Nissan Versa. This repair involves replacing the damaged tires component with a new or refurbished part. The process typically takes 30-45 min and requires easy skill level.
What You'll Need
- Replacement tires part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Take off the inner dome light's plastic covering. Either with an opening tool or your hands.
It is suggested that you use a flathead screwdriver due to the pressure you need to use with your hands; nevertheless, exercise caution when using your hands to avoid breaking the lid and/or clips.
Step 2:
Locate the bulb in the middle of the outlet.
Should it remain hot, give it a minute or so too cool down before removing the lightbulb.
Prior to removing the light bulb, be sure it is not hot.
Step 3:
Push the tab away from the bulb to release the bulb.
Step 4:
Replace the dead or broken bulb with a new bulb by inserting a side in the hole first then pushing it upwards past the tab to seal it inside.
The socket for a 2012 Nissan Versa is a DE3175 bulb.
In order to prevent burns, turn off the power supply before changing the lightbulb.Because the light bulb is fragile, you should use caution when inserting it into the socket to avoid breaking it.
Step 5:
Make sure the lightbulb and socket are operational by turning on the light by pushing the switch.
(If it is successful, your light ought to shine like the ones in the pictures.)
Step 6:
To put the clear cover back you insert the side with one large hinge to the open space hinge.
The light assembly has a hinge, which clips back in
Step 7:
Once the lid is pressed into place with your fingertips till you hear a click to indicate you sealed it, your car will be illuminated by a new light.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $21-$45)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($35-$75)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2012 Nissan Versa instead of replacing it, you're preventing approximately 5899 kg of CO₂ emissions. Manufacturing a new 2012 Nissan Versa generates 5900 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2012 Nissan Versa and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.