Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Maintenance
easy

2012 Nissan Murano Oil Change

Complete guide to 2012 Nissan Murano oil change. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$35 - $75
⏱️ Time:30-45 min
🌍 CO₂ Saved:5898 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$21 - $45
Labor$14 - $30
Total Estimated Cost$35 - $75

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Oil Change is one of the most common repairs for 2012 Nissan Murano. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 30-45 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement maintenance part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1

Pull out the Driver preset panel, if your options package included this. Usually no tools required.

Step 2:

Step 2 - Image 1

Expose one of three screws by prying the door handle trim plate out.

Step 3:

Step 3 - Image 1
Step 3 - Image 2

Pry out the door lock and window control panel. Disconnect all connectors on the back side.

Step 4:

Step 4 - Image 1

Pry up the arm rest to expose the second hidden screw (total of 3).

Step 5:

Step 5 - Image 1

Now you can remove all three hidden screws with the 10mm socket or philips screw driver.

Step 6:

Now the door panel itself can be pried off the door. Starting at the bottom, find the plastic friction plugs and pull enough to pop them out one by one.

Then lift the door panel up off the door. You do not need to remove it completly. This should give you enough room to work on the mirror in the next steps.

Step 7:

Step 7 - Image 1
Step 7 - Image 2

Pull the inside mirror cover off.

Step 8:

Step 8 - Image 1

Unplug the mirror wiring harness. The connector on the door will stay put.

Step 9:

Step 9 - Image 1

Remove the three nuts holding the mirror on to the door. Depending on the age of your vehicle, you may want to clean off the remaining area so the new mirror seals good.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $21-$45)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($35-$75)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2012 Nissan Murano instead of replacing it, you're preventing approximately 5898 kg of CO₂ emissions. Manufacturing a new 2012 Nissan Murano generates 5900 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2012 Nissan Murano and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides