Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Maintenance
easy

2012 Honda Accord Windshield Wiper Replacement

Complete guide to 2012 Honda Accord windshield wiper replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$15 - $40
⏱️ Time:10-15 min
🌍 CO₂ Saved:5799 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$9 - $24
Labor$6 - $16
Total Estimated Cost$15 - $40

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Windshield Wiper Replacement is one of the most common repairs for 2012 Honda Accord. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 10-15 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement maintenance part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1

(Right Side Headlight)

Turn the wheel all the way inward to have enough clearance.

Turn the vehicle fully off before proceeding to the next step.

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Locate the inner fender's retainer clips.

Using a flat-head screwdriver, pry out the retainer clips.

Step 3:

Step 3 - Image 1

Pry back the inner fender liner to gain access to the headlight bulb.

An object may be needed to keep the fender liner pulled back

Step 4:

Step 4 - Image 1
Step 4 - Image 2

Locate the headlight bulb, and turn the item clockwise so that it points towards the engine.

For the left bulb, turn the item counter clock-wise

Step 5:

Step 5 - Image 1
Step 5 - Image 2

Pull out the headlight bulb from its socket.

Be careful while pulling the bulb out, you might damage the bulb or its connected cable.

Step 6:

Step 6 - Image 1
Step 6 - Image 2

For a more visible view of this step since the space is small and cluttered. -Credit for these 3 pictures: @PrecisionLED

To disconnect the bulb, pinch the top of the white block to release it from the bulb

When installing a new bulb, be careful while handling the bulb to not smudge or damage the bulb.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $9-$24)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($15-$40)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2012 Honda Accord instead of replacing it, you're preventing approximately 5799 kg of CO₂ emissions. Manufacturing a new 2012 Honda Accord generates 5800 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2012 Honda Accord and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides