Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Lighting
easy

2011 Subaru Impreza Headlight Bulb Replacement

Complete guide to 2011 Subaru Impreza headlight bulb replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$20 - $100
⏱️ Time:15-30 min
🌍 CO₂ Saved:5799 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$12 - $60
Labor$8 - $40
Total Estimated Cost$20 - $100

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Headlight Bulb Replacement is one of the most common repairs for 2011 Subaru Impreza. This repair involves replacing the damaged lighting component with a new or refurbished part. The process typically takes 15-30 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement lighting part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1

First, check to see if your front-turn signal is not working properly or not bright enough.

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Turn on your car and turn your wheels so that you have access to the headlights and front-turn signal.

Make sure the car is in park and turned off before you begin making your repair.

Step 3:

Step 3 - Image 1
Step 3 - Image 2

Use a flathead screwdriver and your hand to loosen the panel.

Pry the front bumper open away from the black panel.

Step 4:

Step 4 - Image 1
Step 4 - Image 2

Look inside of the bumper and up towards where the headlights and front-turn signal are.

Locate the white bulb socket for the front-turn signal.

Reach inside and grab the white bulb socket

Twist counter-clockwise to remove the bulb and socket from their position.

Step 5:

Step 5 - Image 1
Step 5 - Image 2

You should see the bulb being removed from its front-turn signal location.

Step 6:

Step 6 - Image 1
Step 6 - Image 2

Pull the bulb socket and bulb out to an easy to handle area.

Remove the nonfunctioning bulb from the bulb socket.

Insert new bulb into the bulb socket and twist clockwise until it is tightly fastened.

Step 7:

Step 7 - Image 1

Now your front-turn signal should be working properly.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $12-$60)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($20-$100)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2011 Subaru Impreza instead of replacing it, you're preventing approximately 5799 kg of CO₂ emissions. Manufacturing a new 2011 Subaru Impreza generates 5800 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2011 Subaru Impreza and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides