2011 Nissan Altima Air Filter Replacement

Air Filter Replacement is one of the most common repairs for 2011 Nissan Altima. This repair involves replacing the damaged engine component with a new or refurbished part. The process typically takes 15-20 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

• Replacement engine part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Remove the screws using the Phillips #3 screwdriver.

Step 2:

Pull the glove box out of its slot.

Step 3:

Remove the tab that holds up the wires to the glove box light.

Place the glove box on the floor of the car, so that it can be out of your way.

Step 4:

Locate the cabin air filter housing on the back left hand side behind the radio. (Area of filter housing circled in photo.)

Open housing and remove the old filter.

Step 5:

Throw out old filter and open up the new one.

Step 6:

Properly insert the new air filter into housing. ( Air filter will have direction of air flow on the side.)

Step 7:

Return the cabin air filter cover. Return and screw in the glove box so that it's back to normal.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2011 Nissan Altima instead of replacing it, you're preventing approximately 5899 kg of CO₂ emissions. Manufacturing a new 2011 Nissan Altima generates 5900 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!