2011 Honda HR-V Brake Pad Replacement
Complete guide to 2011 Honda HR-V brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Brake Pad Replacement is one of the most common repairs for 2011 Honda HR-V. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
🔧 Required Tools
🔩 Replacement Parts
What You'll Need
- Replacement brakes part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1: Opening key fob
Turn key over so "H" is in your view.
Swipe the small switch below the "H" to the right while holding the key with both hands.
Step 2: Taking key out of key fob
Slide the valet key out from the remote.
Insert the valet key in between the two black rectangles on the edge of the remote.
Turn the key to the right to pry the two parts open.
Step 3: Taking battery out
The valet key shell will split into two parts.
Using minimal force take the battery out with your finger or a plastic prying tool.
Lift the battery out.
Step 4: Replacing battery
Insert the new battery by putting the bottom of battery in big teeth first.
Push the top of the battery into place.
Step 5: Putting key fob back together
Push the two halves of the key together.
Align the edges and seal it in place by pressing the sides of the shell together.
Step 6: Inserting key back into key fob
Insert the valet key back into the designated slot opposite of the silver loop.
Smart key battery is replaced and ready to use!
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $90-$180)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($150-$300)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2011 Honda HR-V instead of replacing it, you're preventing approximately 5795 kg of CO₂ emissions. Manufacturing a new 2011 Honda HR-V generates 5800 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2011 Honda HR-V and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.