2010 Nissan Altima Windshield Wiper Replacement

Windshield Wiper Replacement is one of the most common repairs for 2010 Nissan Altima. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 10-15 min and requires easy skill level.

What You'll Need

• Replacement maintenance part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Carefully lift the wiper blade off the windshield of the car.

Step 2:

Push the small tab on a piece that connects the old wiper blade to the wiper arm (connecting to the car).

While pushing the tab, invert the wiper blade horizontally.

Lift the wiper blade off the hook of the wiper arm.

Step 3:

Invert the new wiper blade horizontally.

Place the wiper arm hook in the slot of the new wiper blade.

Step 4:

Hook the wiper arm hook onto the tab of the wiper blade.

Invert the blade vertically and place on the windshield.

Step 5:

Repeat the same steps on the other windshield wiper blade and wiper arm.

Step 6:

Dispose of the old wiper blades.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2010 Nissan Altima instead of replacing it, you're preventing approximately 5899 kg of CO₂ emissions. Manufacturing a new 2010 Nissan Altima generates 5900 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!