2010 Mercedes-Benz C-Class Windshield Wiper Replacement

Windshield Wiper Replacement is one of the most common repairs for 2010 Mercedes-Benz C-Class. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 10-15 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

• Replacement maintenance part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Start by pressing down on the button that opens the center arm-rest.

Pop each side of the silver trim using the trim removal tool or a plastic opening tool.

Remove the silver trim.

Step 2:

Remove the two 20 mm screws securing the center console with a T20 Torx screwdriver.

Step 3:

Make sure there aren't any loose articles in the center storage compartment.

Lift the end of the center-console and flip it to reveal the undercarriage of the center-dial touchpad and its wirings.

Step 4:

Press your thumb on the safety tab to remove each blue connection.

Step 5:

Press down on the center of the white connection in the middle and slide the safety latch to the left to pull out the main white connection.

Step 6:

Remove the two 15 mm T15 Torx screws holding the center-dial touchpad.

Firmly press the center-dial touchpad out to remove the unit.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2010 Mercedes-Benz C-Class instead of replacing it, you're preventing approximately 6699 kg of CO₂ emissions. Manufacturing a new 2010 Mercedes-Benz C-Class generates 6700 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!