2010 Kia Soul Brake Pad Replacement
Complete guide to 2010 Kia Soul brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Brake Pad Replacement is one of the most common repairs for 2010 Kia Soul. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement brakes part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Open the car trunk.
Step 2:
Use a Phillips #2 screwdriver to remove the four 20.0 mm screws from the tail light assembly.
Step 3:
Pull the tail light assembly off.
Apply a counterclockwise motion on the tail light while you are pulling it off.
Do not use too much force to prevent cracking the plastic lens.
Step 4:
Turn the brake light socket 1/4 counterclockwise and pull it from the tail light assembly.
The brake light is located at the bottom of the tail light assembly.
Step 5:
Press the light bulb down and turn it 1/4 counterclockwise.
Step 6:
Pull the light bulb out of the socket.
Step 7:
Press the new light bulb down into the socket and turn it 1/4 clockwise direction.
Before performing this action make sure you properly place the light bulb into the socket.
Step 8:
Follow the guide in reverse order to put the socket and the tail light assembly back.
Before you screw the tail light assembly back have someone press the brake paddle to see if the new light bulb turns on.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $90-$180)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($150-$300)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2010 Kia Soul instead of replacing it, you're preventing approximately 5695 kg of CO₂ emissions. Manufacturing a new 2010 Kia Soul generates 5700 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2010 Kia Soul and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.