2010 Hyundai Elantra Air Filter Replacement
Complete guide to 2010 Hyundai Elantra air filter replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Air Filter Replacement is one of the most common repairs for 2010 Hyundai Elantra. This repair involves replacing the damaged engine component with a new or refurbished part. The process typically takes 15-20 min and requires easy skill level.
What You'll Need
- Replacement engine part (OEM or aftermarket)
 - Precision screwdriver set (Phillips #000 or pentalobe)
 - Opening tools (plastic spudger, suction cup)
 - Adhesive strips or glue
 - Clean workspace with good lighting
 
Step-by-Step Process
Step 1:
Pull the lever to open the car hood.
For the Hyundai Elantra 2013, it is located on the driver's side near the door.
Step 2:
Open the car hood by pressing the hood latch to the side
Merely lifting the hood anyways will not open the hood.
Step 3:
Properly prop the car hood open with the internal car hood stand.
It is located on the left side of the engine.
Step 4:
Identify the engine air filter location, which is on the right side.
Step 5:
Open the engine air filter cover by removing the two latches on the right side of the cover.
Step 6:
Remove the cover and remove the old engine air filter.
Step 7:
Grab and insert the new engine air filter in place of the old one.
Step 8:
Close the engine air cover and re-apply the latches on the right side.
You can close the car hood when you are finished.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $12-$30)
 - ✅ Learn new skills
 - ❌ Risk of further damage
 - ❌ No warranty
 - ❌ Requires tools and time
 
🔧 Professional Repair
- ✅ Expert installation
 - ✅ Warranty included
 - ✅ Faster turnaround
 - ❌ Higher cost ($20-$50)
 - ❌ Need to find reputable shop
 
Environmental Impact
By choosing to repair your 2010 Hyundai Elantra instead of replacing it, you're preventing approximately 5699 kg of CO₂ emissions. Manufacturing a new 2010 Hyundai Elantra generates 5700 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2010 Hyundai Elantra and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.