Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Electrical
easy

2010 Honda Odyssey Battery Replacement (Car)

Complete guide to 2010 Honda Odyssey battery replacement (car). Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$100 - $200
⏱️ Time:30 min
🌍 CO₂ Saved:5785 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$60 - $120
Labor$40 - $80
Total Estimated Cost$100 - $200

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Battery Replacement (Car) is one of the most common repairs for 2010 Honda Odyssey. This repair involves replacing the damaged electrical component with a new or refurbished part. The process typically takes 30 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement electrical part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1: Locate the Glovebox

Step 1 - Image 1

Locate the glove box, which is positioned in front of the passenger-side seat.

Step 2: Open the Glovebox

Step 2 - Image 1
Step 2 - Image 2

Pull on the handle to open the glovebox.

Step 3: Remove the Dampener Hinge

Step 3 - Image 1
Step 3 - Image 2

Remove the cover of the dampener on the upper left-hand side (facing the glovebox) by pulling the semi-circular piece towards your body.

Pull the actual hinge outward and off of the cylindrical piece to which it was hooked.

Step 4: Remove the Stops

Step 4 - Image 1
Step 4 - Image 2

The stoppers are snapped in place with plastic at the top left and right side of the glovebox. Use a flathead screw driver to unsnap these hinges from their place.

Using one hand, push the glovebox slightly closed to create space. Using the other hand, rotate the piece and pull outward (perpendicular from the wall of the glovebox) until the hinge comes free.

Repeat for both stoppers on each side.

Step 5: Locate and Remove the Air Filter Holder

Step 5 - Image 1
Step 5 - Image 2

Press inward on the two plastic pieces on each side of the air filter and pull towards yourself for removal.

Step 6: Take Out the Old Air Filter and Replace

Step 6 - Image 1
Step 6 - Image 2

The air filter will be in the removed holder.

Remove the old air filter and replace it with the new air filter. There will be an arrow to point in the direction of "air flow". Make sure these arrows match on both the container and the filter.

Place the container holding the new air filter back and push until it snaps into place.

Use these directions in reverse to rebuild your glovebox.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $60-$120)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($100-$200)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2010 Honda Odyssey instead of replacing it, you're preventing approximately 5785 kg of CO₂ emissions. Manufacturing a new 2010 Honda Odyssey generates 5800 kg of CO₂, while this repair only produces about 15 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2010 Honda Odyssey and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides