2010 Honda HR-V Air Filter Replacement

Air Filter Replacement is one of the most common repairs for 2010 Honda HR-V. This repair involves replacing the damaged engine component with a new or refurbished part. The process typically takes 15-20 min and requires easy skill level.

What You'll Need

• Replacement engine part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Pull the hood release lever under the dashboard on the driver's side.

Step 2:

Locate the engine cover latch to unlock hood of the car.

Pull the latch to the right and hold it in place.

Step 3:

Lift up the engine hood and use the hood prop rod to hold it in place.

Step 4:

Pull the 3 tabs holding the air intake cover in place.

Step 5:

Lift the air intake cover to remove the old filter.

Step 6:

Insert the new air filter into the air intake cover.

Make sure you align the new filter in the correct orientation

Step 7:

Close the air intake cover and reattach the tabs.

Step 8:

Close and lock the engine hood.

Give it a good push, downwards until you hear a "thump" sound.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2010 Honda HR-V instead of replacing it, you're preventing approximately 5799 kg of CO₂ emissions. Manufacturing a new 2010 Honda HR-V generates 5800 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!