Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Brakes
moderate

2010 Ford Taurus Brake Pad Replacement

Complete guide to 2010 Ford Taurus brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$150 - $300
⏱️ Time:1-2 hours
🌍 CO₂ Saved:6195 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$90 - $180
Labor$60 - $120
Total Estimated Cost$150 - $300

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Brake Pad Replacement is one of the most common repairs for 2010 Ford Taurus. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement brakes part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Remove the plastic clips which fasten the outside cover.

Step 2:

Step 2 - Image 1

Pull out the cover to access the housing

Step 3:

Step 3 - Image 1
Step 3 - Image 2

Using wrench to remove the four bolts to open the housing.

Step 4:

Step 4 - Image 1
Step 4 - Image 2

Open the housing to access the bulb set and remove it out to replace it.

Step 5:

Step 5 - Image 1
Step 5 - Image 2

Put the new light bulb and make sure it is working.

Step 6:

Step 6 - Image 1
Step 6 - Image 2

Place the housing cover on and return the bolts.

Step 7:

Step 7 - Image 1
Step 7 - Image 2

Return cover and use the plastic clips to fasten it.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $90-$180)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($150-$300)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2010 Ford Taurus instead of replacing it, you're preventing approximately 6195 kg of CO₂ emissions. Manufacturing a new 2010 Ford Taurus generates 6200 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2010 Ford Taurus and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides